Plumbing Fixtures
All RALab Systems Corporation remote-operated fixtures come standard with four-prong handles, baked color-coded epoxy upper assemblies and control rods cut to length. Chrome and other styles are available upon request. Preplumbed services are 3/8" black pipe for gases and 1/2" rigid copper with soldered joints for water and other lab services.
| Gas | FXTGAS |
| Air | FXTAIR |
| Vacuum | FXTVAC |
| Nitrogen | FXTNIT |
| Cold water | FXTCW |
Others available upon request
Remote Control Fixtures
Gooseneck Faucet
Part #FXTGN
Specify Hot or Cold
Hot and Cold Water Mixing
Part #FXTCWM
90° Water Faucet
Part #FXTDS
Deck Mount Gas Single Outlet
Part#FXTDMG1
Deck Mount Gas
Double Outlet
Part #FXTDMG2
Deck Mount Water
Part #FXTDMW
Panel Mounted Mixing Faucet
with Swing Spout, Lever Handles
Part #FXTPMSGN-6
Part #FXTPMSGN-8
Part #FXTPMSGN-10
Part #FXTPMSGN-12
Part #FXTPMSGN-14
Part #FXTPMSGN-16
Gooseneck Faucet
with Vacuum Breaker
Part #FXTGNWVB
Specify Hot or Cold
Electrical Fixtures
Single Pole 15 Amp Light Switch
Standard Black Color
and Cover Plate
Part #LTSW
Red Illuminated
Toggle Switch with
Black Cover Plate
Part #BLSW
Explosion Proof Outlet
Class 1, Group 1
Part #XPO
Explosion Proof Switch
Class 1, Group 1
Part #XSW
208 Volt, 20 Amp Single
Pole Receptacle
230, 277 or other
available upon request
Part #208
120 volt 20 Amp Ground
Fault Interrupter (GFI)
Duplex Outlet Standard Black
color with cover
Part #GFI
Explosion Proof Light
Class 1, Group 1
Available in incandescent
or fluorescent
Part #XPL
Pre-Wire service is completed in accordance with NEC and UL-1805 standards.
Note: If the fume hood is not pre-wired, wiring in the field must be accomplished using UL listed electrical fixtures while observing NEC standards and local electrical codes.